If you already have a table saw, the table saw jigs are the next thing you need to get to ensure that you can make a variety of different cuts.
Read on and find out what they are, what beneficial features they offer, and which model is the perfect choice for you.
Need-To-Know Information About The Table Saw Jigs
What Is A Table Saw Jig Used For?
A table saw jig is specially designed and used to ensure that you can get perfectly sharp and clean cuts with your table saw. It will allow you to make multiple cuts of the same width while keeping your fingers away from the saw’s blade.
Veriety Of Jigs
There are many different table-saw jigs on the market for you to choose from. For example, there are crosscut jigs that are specially designed for cutting smaller pieces, angle jigs that allow you to cut your material at a precise angle, etc.
How Much Do They Cost?
You can find a variety of table saw jigs on the market that come at different prices. The most expensive one on this list cost around two hundred and fifty dollars while the cheapest one cost bellow thirty dollars. Both models offer amazing features and provide exceptional performance.
Are They Worth Purchasing?
Table saw jigs are definitely worth purchasing because not only will they allow you to make the most perfect cuts, they will also keep your hands safe from the blade. You could use only the rip fence that comes with your table saw but you will end up pushing your material toward the blade with a push stick and that means you could get your hands in harm’s way.
Best9 Table Saws Jigs: Taper, Jointer & More
Best Table Saw Jointer Jig
Kreg K4 Pocket Hole Jig System
For Variety Of Materials
This table saw jointer pocket hole jig is specially designed to ensure that you can use it with a variety of different materials that can be from twelve millimeters to thirty-eight millimeters thick. The best thing is that you can also use it as a repair tool.
Toggle Clamp
Forget all about using glue and a large number of small clamps to secure the jointer. For you to clamp this table saw jointer pocket hole jig to a benchtop base you will only need a simple toggle clamp and you are good to go.
Complete Package
The best thing about this jointer jig is that it comes with a complete package that consists of everything you need for carefree use. The package includes a pocket-hole plug set, a six-inch square driver, a stepped drill bit, and a starter Kreg Screw set.
- for benchtop and portable use
- for materials from 1/2″ to 1 1/2″ thick
- wood-chip relief holes
- great for making home repairs
Best Table Saw Finger Joint Jig
Rockler Router Table Box Joint Jig
Perfect For Larger Projects
This table saw finger joint jig is the perfect choice for everyone who loves to do woodworking projects. It will allow you to create much bigger box joints for larger projects. You will be able to make large wooden chests, cabinets, etc.
Quick Setup
Another amazing thing about this table saw finger joint jig is that it is very simple to set up. The whole process will take just a few minutes of your time and you will be ready to start creating amazing projects.
Affordable Price
If you are not interested in spending a lot of money on a table saw finger joint jig this model might be a great choice for you. It costs less than one hundred dollars. To find out more about the beneficial features of having the best finger joint jig go to our home page and check our reviews.
- sturdy steel sled
- aluminum indexing keys
- two sacrificial MDF boards
Best Box Joint Jig Table Saw Sled
INCRA I-BOX Jig for Box Joints
Revolutionary Design
This box joint table saw sled features a high-quality, revolutionary design. Because of this feature, you will be able to set it up very quickly, it will offer much greater versatility, and it will provide you, as a user, with improved safety features.
Lead Screw Mechanism
Another great thing about this box joint table saw sled is that it comes with an exclusive dual-pitch lead screw mechanism that allows you to make micro-adjustments. It also provides a wide range of 1/8-inch – 3/4-inch width of pins.
GlideLock Miter Bar
The glide lock miter bar that comes with this box joint table saw sled is designed to fit standard 3/4-inch x 3/8-inch miter slots. There are many more similar models you can check in this post about the top-rated box joint jigs.
- quick setup
- improved user safety
- reversible design
- fast micro-adjusting
- reusable MDF sub fence
Best Table Saw Taper Jig
ROCKLER TAPER JIG
Precise Performance
The best thing about this table saw taper jig is that it features a smooth sliding design, simple indexed angle setting system, and heavy-duty clamps that are designed to hold it down to the working surface. It is a perfect choice if you need a jigsaw that will allow you to make lengthy and angeled cuts.
Ergonomic Handle
You won’t have any trouble using this table saw taper jig for completing different projects. It is just what you need for creating chairs and table legs, etc. It comes with an ergonomic handle that allows you to make simple and smooth movements throughout the cut.
Wide-Body Clamps
This table saw taper jig also comes with wide-body clamps that feature rubber caps that provide a much better grip on the surface. They are designed to hold the stock and prevent it from drifting dangerously away from the fence.
- lengthy angled cuts
- three adhesive strips
- simple indexed angle setting system
Best Table Saw Angle Jig
Fulton Cutting Jig For Creating Tapered Angles Up to 15 Degrees
Perfect For Woodworking Projects
This table saw angle jig is specially designed to ensure that you can make perfectly sharp, long rip cuts in a wide range of angles from one to fifteen degrees. It is the perfect choice for everyone who wants to have a serious shot at creating magazine racks, table and chair legs, etc.
Fully Adjustable Jig
The best thing about this table saw angle jig is that it is fully adjustable. That means that you can use it both with your left and right hand. Additionally, you can set it up on either the left or the right side of your table saw fence.
Durable Aluminum Design
This table saw angle jig is entirely made out of durable aluminum material. It has an easy-grip handle, easy to read scale, adjustable rail with fixed stop, and many more amazing features. If you are still not sure about this model, read this post about the best angle cutting jigs on the market.
- easy setup
- up to 15-degree angles
- works on both left and right side
- fixed stock-holder
- easy-to-read scale
Best 45 Degree Jig For Table Saw
Rockler 45 Degree Miter Sled
Adjustable Nylon Pins
This 45-degree jig for the table saw comes with pre-installed adjustable nylon pins. The pins are specially designed to ensure that the jig fits perfectly to the miter track. It will help you make the most perfect 45-degree cuts for your projects.
Low Friction Slide
The high-quality polycarbonate design of this 45-degree jig for the table saw ensures low friction sliding on the table saw and the durability of the jig. That means that you won’t have any trouble using it and you will get the most perfect results every time you do so.
Low Cost
You don’t have to worry about spending a large amount of money on a 45-degree jig for the table saw. This model costs less than thirty dollars which makes it very affordable. This is not the only 45-degree jig on the market. Go to our web page and find more information.
- durable design
- no adjustments required
- affordable price
Best Table Saw Spline Jig
Eagle America Router Table Spline Jig
Perfect For DIY Projects
This table saw spline jig is the perfect choice for those who love DIY projects and for everyone who enjoys light woodworking experiences. It will help you make smaller creations, such as picture frames or different jewelry boxes you can use at home.
Adjustable Support Fences
The two adjustable support fences that come with this table saw spline jig can come in very handy especially when you are cutting splines across the corners. They are specially designed to ensure that you can easily clamp your project to them.
Vertical Handles
Thanks to the built-in vertical hands that this table saw spline jig has to offer you will be able to hold the jig safely, without worrying that your hands might get in touch with the saw’s blade. If you like this model check out this post about the top-rated spline jigs you can currently find for sale.
- melamine coated MDF
- 15-1/2″ wide base
- two support fences
- vertical handles
Best Table Saw Tenon Jig
Grizzly Industrial Tenoning Jig
Guide Bar
This table saw tenon jig features an adjustable guide bar. The bar is specially designed to help you control the sliding precision inside the miter gauge. Thanks to that feature you will be able to make perfectly sharp and accurate cuts.
Adjustable Bevel
The best thing about this table saw tenon jig is that it allows you to adjust its features according to your needs. For example, you can easily adjust the bevel angle between ninety and seventy-five degrees. Also, you can adjust the backstop from ninety to forty-five degrees.
Multi-Position Control Levers
Tenon jigs offer some pretty amazing beneficial features to their users. Thanks to the multi-position control levers that this table saw tenon jig has to offer you will be able to get perfectly accurate and repeatable results with each use.
- dependable design
- fits left- and right-tilting table saws
- two large handwheels
- adjustable backstop and bevel angle
- extra-large clamping handwheel
Best Dovetail Table Saw Jig
Keller Dovetail Journeyman DoveTail Jig
Back To Back Model
This dovetail table saw jig features a highly practical back to back design. It is designed to handle wood materials of any width and 1/8 to 3/4 inches thickness to ensure you get the most perfect results for every project you do.
Highly Practical
The best thing about this dovetail table saw jig is that you can use it to create many different cuts and you can control the length between the cuts you make. It is the perfect choice for mini to mid-size woodworking projects.
Full Package
You will get everything you need with this table saw dovetail jig to ensure that you can enjoy a perfectly carefree experience. The package includes standard dovetail bit, ball-bearing template guides, a straight bit, and a phenolic guide.
- 15-inch precision-milled template
- for unlimited widths and lengths
- back-to-back model
Conclusion: What Are The Two Best Table Saw Jigs You Should Consider Buying?
If you want to have a high-quality table saw angle jig I highly recommend buying the Fulton Cutting Jig For Creating Tapered Angles Up to 15 Degrees. It will allow you to create perfectly clean angled cuts and it will fit on any side of your table saw.
On the other hand, if you are interested in purchasing a tenon jig I recommend getting the Grizzly Industrial Tenoning Jig. It allows you to adjust its features according to what you want to cut and how you want to cut it. However, if you decide to place it on a left tilting table saw you will need to do some additional assembly.